Precision - Manufactured and High - Density Glass Fiber Reinforced Mesh for Enhanced Engineering Performance

• Customization: Available
• After-sales Service: Online
• Warranty: 2 Years
• Model NO.: Customizable
• Color: Customizable
• Application: Retaining Wall, Steep Slop, Dam, Road Base
• Viscose: Without Viscose
• Function: Reinforcement
• Classification: Fiberglass Geogrid
• Material: Fiberglass
• Breaking Strength, MPa: 1300
• Coefficient of Elongation, %: 2.50
• Electric Conductivity: Non-Conductive
• Thermal Conductivity: Low
• Corrosion Resistance: High (Unaffected by Water)
• Heavy Load Resistance: No Permanent Deformation
• Magnetic Characteristics: Does Not Magnetize
• Costs: Lower Manufacturing Costs, Maintenance Costs, and
• Coefficient of Heat Conductivity, W/(M*: 0.46
• Breaking Tension of The Rod, Kgf: 600
• Density (G/Cm³): 1.6-1.9
• Tensile Strength (MPa): ≥600
• Yield Strength (MPa): ≥500
• Conductivity (ω · M): Insulation
• Salt Spray Resistance Time (H): 5000+ (No Rust)
• Transport Package: Exporting Special Packing
• Specification: Customizable
• Trademark: Aohong
• Origin: Hengshui, Hebei, China
• Production Capacity: 50000 Square Meters/ Day

Product Description

 

Product Description

 

What is FRP reinforcing bars Mesh?

FRP Rebar Mesh is a high-performance reinforcement material made from woven glass fiber strands, coated with an alkali-resistant layer. It is widely used in construction, decoration, and industrial applications for strengthening, crack resistance, and protection. The mesh is lightweight, durable, and offers excellent resistance to alkaline environments, making it ideal for use in exterior insulation and finishing systems (EIFS), plastering, and concrete reinforcement.

 

Performance index	FRP reinforcing bars	Ordinary reinforcing bars
Density (g/cm³)	1.6-1.9	7.85
Tensile strength (MPa)	≥600	400
Yield strength (MPa)	≥500	400
Conductivity (Ω · m)	Insulation (> 10¹²)	Conductivity (1.7×10)
Design life (years)	100 +	30-50
Salt spray resistance time (h)	5000+ (No rust)	500 (Severely rusted)
Corrosion resistance	High (unaffected by water)	Low (without expensive galvanisation treatment bars of steel are subject to oxidation)
Heavy load resistance	No permanent deformation	Can be permanently deformed
Costs	Lower manufacturing costs, maintenance costs, and transportation expenses (related to lightweight)	Lower material costs but higher overall costs of production, transportation, installation, and technical maintenance

 Fiberglass reinforcing mesh is 3 times stronger, 8 times lighter than steel and durable for over 80 years. It is applicable to reinforce floors, concrete pads, roads and parking lots. We offer mesh with wide range opening sizes and bar diameters. Standart delivery form is rolls with a width of 1 m and length of 50 m. For sheets 1×2 or 1×3 m or 2×3 m or 2×6 m. Mesh opening sizes from 50×50 to 400×400 mm. We also produce the mesh according to individual customer sizes.

Product Description

Corrosion resistance

It has excellent resistance to chemical substances such as acids, alkalis, and salts, and can resist the erosion of chloride ions and low pH solutions. It is particularly resistant to the corrosion of carbon compounds and chlorine compounds, making it suitable for harsh corrosive environments.

 

Excellent environmental performance

During the production process of FRP Rebar Mesh, compared with traditional reinforcing bars, energy consumption is lower and no large amounts of greenhouse gas emissions such as carbon dioxide are produced.

High strength

It has a relatively high tensile strength, comparable to or even higher than that of ordinary steel bars, which can meet the load-bearing capacity requirements of various structural projects. At the same time, it can perform better mechanical properties in some special structures

Customized shapes and colors

 

Product Photograph

Transportation

 

Company Profile

FAQ

Q1: Where is your factory?
A1: Our factories are mostly located in Hebei, China.

Q2: What's your MOQ?
A2: Commonly our MOQ is one container, but different for some goods, pls contact us for details.

Q3: What is your sample policy?
A3: We can supply the sample if we have ready parts in stock, but the customers must pay the courier cost. all the sample costs will be refunded after you place the order.

Q4: Do you test all your goods before delivery?
A4: Yes, we would like the goods to be tested before delivery.

Q5: All costs will be clear?
A5: Our quotations are straightforward to understand. it won't cause any extra costs.